From a single valve requirement to a complex set of valves with stringent technical requirements, leave it to us and we will work our magic on it.

We provide support during the bidding stage and inputs against your valve datasheet together with a free evaluation of service environment adoptability.

Our expert engineer can also be on the site to examine any valve maintenance requirement or to assess valve issues.

We draw our strength from our in-depth understanding of pipeline valves, vast experience accumulated in the industry together with our long relationships with reputable valve manufacturers.

Our Valve Supply Scope

Sizes: 1⁄2” to 36”
Pressure Rating: ASME 150# to 2500#

Valve Design Standard: API 6D, API 600, API 602, API 609, BS 1868, BS 1873, ASME B16.34.

Duplex & Super Duplex: ASTM A995 Gr. 4A / 5A / 6A, ASTM A182 F51 / F53 / F55 Nickel Alloy: ASTM B564 UNS N08825, ASTM B564 UNS N06625.

Teflon Lined: ASTM A216 WCB+PTFE / ASTM A352 LCB+PTFE.

Valve Trim including: F51, F53, F55, MONEL® alloy 400/K500, INCOLOY® alloy 825, INCONEL® alloy 625, Alloy 20, PTFE Lined.

End Connections: Valve ends according to ASME B16,5 RTJ or RF, SW, BW,
NPT, integral pups.

Actuation: Lever Operator, Gear Operator, Hand wheel, Pneumatic Actuator, Electric Actuator, Hydraulic Actuator.

• Ball Valve (Floating & Trunnion): single pc, 2 pcs & 3 pcs split bolted bonnet.
• Gate, Globe & Check Valve.
• Butterfly Valve: Concentric, Eccentric & Triple Eccentric.
• Double Block and Bleed Dual Expanding Plug Valve.
• Teflon Lined Valve & Fittings.
• Cladded Valves (including INCOLOY® alloy 825 and INCONEL® alloy 625).

We can supply ACTUATED VALVES with any of the below Mechanism and to any specifc AML.

• Pneumatic Actuator Valve.
• Electric Actuator Valve (MOV).
• Hydraulic Actuator Valve.
• Electro-Hydraulic Actuator Valve.

Actuators can also be supplied complying with SIL requirement.

If you would like to find out how Corrotherm can manage your valve requirements, get in touch using our contact page. We look forward to hearing from you.

• Valve Calibration (Online / Ofline).
• Hydro testing.
• Seat leakage repair assistance.
• Control Panel rectification / modification assistance.
• Cladding of Valves.
• Any other NDT Testing.

If you would like to find out how Corrotherm can manage your valve requirements, get in touch using our contact page. We look forward to hearing from you.

We can supply valves for various operating conditions, from exceptionally high temperature up to 816 oC and high pressure (greater than 25,000 PSI) to cryogenic to -192 oC and very low-pressure application.

• Valves for sour service and extreme corrosive environments.
• On-shore, offshore, subsea and refineries.
• Atmospheric distillation.
• Vacuum distillation.
• Hydro treating.
• Catalytic reforming.
• Fluidized catalytic cracking
• Hydro cracking.
• Alkylation.
• Sulphur recovery.
• Gasification.
• Power plant.
• Sea water application.
• Flare emission.
• Chemical plant.
• Caustic soda plant.
• Desalination plant.
• Sewerage plant.
• Tank Farm.
• Chemical Injection skids.

If you would like to find out how Corrotherm can manage your valve requirements, get in touch using our contact page. We look forward to hearing from you.